The online magazine on the history and operation of vintage scale model trains in American OO gauge

Saturday, December 27, 2014

Sides of Mystery, and Collecting Models with Printed Sides

One of my projects this fall was getting more organized in terms of the cars I have that have printed car sides. That area of “the collection” is a lot easier to access now and I would first note that collecting vintage OO gauge models with printed sides is a viable collecting option -- if somewhat obscure. But Lord knows Lionel collectors spend years collecting numerous obscure variations and models, and collecting American OO cars with printed sides is just as viable an activity. Also I rather doubt it would be possible at this point for any really motivated individual to actually own examples of every type of side ever produced, so it could become a lifetime project.

Part of the problem is that some makers did not last long at all -- while advertised, very few models made it out to the market. These two cars are great examples, as they have sides by an unknown manufacturer. I can say what they are not. They are not Champion, Eastern/Famoco, Hoffman's, or Nason/Page. Vanden Boom, another firm of mystery, did not list these models.

What I suspect is they may be cars built with Yardmaster sides, a firm I look at here. I have yet to see a boxed example of any kit by this firm, but as I have mentioned elsewhere in this site there were Yardmaster kits listed in lots sold at the Morlok auction and I strongly suspect there are a few of them out there. And they certainly listed car sides of the type seen on these cars in their advertising.

The Armour car is beautifully built up but I think fairly recently. The FGEX car is a bit rougher and was not completed by the original builder. It is on a Picard body with a Nason frame and trucks, and is a model I plan to (with time) bring more to completion.

The second photo shows the sides themselves. I have only these sides and cars, with one set of sides still in what I presume to be the original packaging, which is similar but somewhat different than that I have seen with Champion, Eastern, Famoco, or Nason.

Curiously and probably significantly there is a “W” code found on these sides. Others have speculated that when that this W is present the sides were actually made by Westbrook. The FGEX car is W-3 and the Armour car W-16. Westbrook definitely made OO parts for other companies (wood parts and sides), certainly for Eastern/Famoco and very likely also for Nason. These sides of mystery look generally similar to sides from those lines for sure but are not actually the sides they sold.

Perhaps somewhere in the bowels of your collection you have some Yardmaster kits and can solve this mystery. And, if nothing else, perhaps this post will inspire a few readers to sort out their vintage models with printed sides by brand of side as I have, it is an interesting project.

Thursday, December 25, 2014

Cars with Scale-Craft Decals

One interesting category of vintage American OO gauge cars are models decorated with Scale-Craft decals, in particular the earlier pre-war decals, as later the decals were produced for them by Walther’s (and were really just repackaged HO decals). An overview of S-C decal production is here. The original decal line has a distinctive look, as seen in these cars below.

One of my projects has been organizing cars in “the collection,” and in particular cars such as these do stand out. A gallery of drawings that were shipped out with these decals are presented in this prior article. 

To these specific cars, looking at them after taking the photos [UPDATED: 2016] I am fairly sure these are all S-C decals other than the ATSF boxcar, which was included mistakenly. Some of these I have multiple examples of, for example the SFRD reefer and the SP hopper (which really looks a lot like the Lionel model when decorated this way). When I have the decal drawings the cars always match the decal drawing right down to the car number, although I chose the wrong car for the MP stock car, it has a new number board (I have another example that matches the decal drawings). All of them that are of models that are in the catalogs match the catalog photos

Often, between probably a so-so original (brush) painting job and rough handling over the years the decals have gotten beat up a bit on some of the examples below. Still, I plan to hold on to at least one model decorated with any given set of S-C decals for a while, I still like how the original decals look on these vintage cars. As always, click on any photo for a bigger view.

Sunday, December 14, 2014

A Modern GE Diesel in American OO

One recent arrival was this model, a CSX GE Dash 8-40C, scratch built by Pierre Bourassa. For American OO this model is a real rarity as it is a model of a very modern engine!

The prototypes of this model were built 1987-92. Pierre was Canadian but I think got inspired to build this big, contemporary CSX model as he wintered in that time frame in Florida. The note on the bottom of the model dates completion of the model to April of 1991; he would have been 74 then.

The simple overview is he built it from sheet plastic, some metal shapes, and used Athearn HO drive components. He captured the look of the prototype pretty effectively and I would say the one element that these photos does not convey is the size of the model. It is full scale for American OO, it is not a big HO model "passing" for OO in any way.

When it came to me (via eBay) there were two pieces missing off the body (on the side visible in these photos), one of the doors and also the visor for the cab window. I replicated those and repainted them a closely matching color -- but glossy -- hoping that they pass for freshly repaired areas (which they are). Also the truck sideframes needed a bit of attention, being pieced together as they are from smaller HO sideframes. The bigger problems were under the hood.

In short I don't think it had ever run well. Pierre was thinking big on one element, as he used I think PA-1 trucks (with a longer wheelbase than their other 6 wheel Diesels) and certainly added larger wheelsets, which help the look of the model a lot. And it did run, but it seemed to be shorting intermittently-- it ran badly. I think Pierre or the subsequent owner had tried to trouble shoot this issue without luck, as there was electrical tape several places but places that would not help the situation.

It runs now! He had only set it up to pick up power from 6 wheels. I added the jumpers to bring that number up to 12 wheel pick up and also cleaned and checked the trucks and wiring. It is not quite 100%, something still causes an occasional hitch and it runs around my loop better in one direction. I will keep working on this element. I believe it is mechanical, related to my curve radius being right at the minimum this model will take; I am hoping with more breaking in this clears up.

The look under the hood in this final photo shows the overall setup. It has a can motor and flywheels. Pierre had added a lot of weight to the model and it was off center, the model was rear heavy. Plus the weights were cramping the wiring. I took out part of the weight, leaving more space and a more balanced model. It is still plenty heavy to pull anything I have put behind it.

A note on the paint scheme. It seems Pierre was trying to do a version of the original CSX "grey ghost" paint scheme, but changed things up a bit with the blue frame and the yellow stripe. I am not sure it is prototypical, but the engine still looks pretty effective and will always be a one-of foreign road engine when I run it.

The car seen with it in the photos is a Railbox car built by Bill Johann (more here). I am enjoying this modern engine pulling modern cars! I have two modern SD-something models underway, and seeing this engine run should propel me getting those finished in the coming months.

Monday, December 8, 2014

A 1934 Reefer by Temple Nieter

Last year I was given a number of RMC “Collector Consist” articles by Keith Wills related to American OO, highlighted in this article.

In particular I was taken by this photo of a 1934 model by OO pioneer H. Temple Nieter, who was the person most responsible for encouraging me as I started out in American OO. I have long wanted to own one of his models, and there must be a few floating around out there, but unless it was actually lettered for his Lake Lines I would have no way to know it was his. This nice 36’ reefer looked pretty sharp on those Lionel trucks and with his custom, handmade couplers visible. The photo shows that the brake wheel was pushed down out of place, though, and it probably needed a bit of TLC.

Fast forward to about a month ago, and this model showed up in a lot on eBay, which I was able to spot and win. Between the Keith Wills article and today the car has picked up a pair of non-rolling Scale-Craft trucks. Also one of the couplers has lost part of the mount, probably in transit at some point.

The notes on the car, visible in the final photo, document what it is. The typed note from Temple says it was built in 1934, and he subsequently gave it to Pierre Bourassa who added his note in October of 1985. From there it made its way to a collection in Pittsburgh and now to me.

As to the car itself, I don’t doubt that Nieter built it in 1934, but it was certainly rebuilt at some later time, most likely in the 1940s. The decals are nicely applied but are almost certainly Walthers products (HO) and the car number used is the same as in the drawings in the Walthers “PLD1” book (521 Prototype Lettering Diagrams, first published in 1942 and reprinted numerous times).

The hatches look like Nason hatches and there are nice door details on the car, but the most notable detail are the couplers. They are made from sheet brass and spring steel wire, and would have coupled automatically and uncoupled with a ramp system of some sort. They also have centering springs and are a very interesting piece of craftsmanship that will mate automatically with a Kadee coupler today.

I won’t be changing the couplers but this car will soon be on a set of trucks that roll! And I will adjust the brake wheel and fix the coupler mount. Very glad to have this car, an authenticated piece from one of the pioneers of model railroading in American OO.

Sunday, December 7, 2014

The Two Printings of the 1937 Nason Catalog

One item not noted in the 1937 series was the two printings/editions of the 1937 Nason Catalog. I had a scan of the cover of the second printing, so I did know there was more than one version, but no full copy of either to reference. However, copies of both versions recently arrived and they are well worth a brief look.

Both versions are clearly marked on the cover as to being the “1st Edition” or the “Second Printing.” That the 1st Edition was printed as so would indicate that they knew the line would be expanding that year and more than one version would be needed. Both of my copies are photocopies, but it is noted on them that the 1st edition has a tan cover and the second printing a yellow cover, with the 1st edition running 12 pages and the second printing running 16 pages.

In both the Foreword is the same:
On entering our fourth year of development and manufacturing of 00 gauge scale model equipment we offer one of the finest and largest assortments of kits and parts for accurate reproduction of railway models ever available in 00 gauge. During the past three years we have been able to make many additions to our line and it is our desire to constantly offer to you new and better equipment at prices within the reach of every model builder. To aid us in carrying out this objective we welcome constructive criticism and suggestions.
If in the construction of any model or in the layout of your system you are confronted with a problem, we sincerely hope that you will at all times feel free to call on us for any assistance which we may be able to offer.
We are prepared to estimate on Exhibits, Displays or any models, parts or material not included herein.
Moving on, first up in the catalog the NYC Hudson locomotive. Kit prices are the same between the two versions ($27 for a complete kit) but the photos are of different models. In the 1st edition it is of a model decorated for the NYC, and in the second printing it is this model decorated for the “Beaver River” railroad. They liked that photo so much it was run on pages 2 and 4 of the second printing. This scan is from the 1940 catalog for clarity.

The next item in the catalog is their venerable P-5A locomotive and then the Easy-Built passenger cars. In the second printing they include a nice photo on page 9 of the PRR coach, not found in the 1st edition. Both versions have the full list of passenger equipment you would expect to see, including all the Easy-Built kits and the cast aluminum cars. (See the Nason 101 article for an overview of the line).

Next up then are the Easy-Built freight cars. The listings are the same for the box cars and reefers but only the second printing includes the flat car, which was a new model that year, illustrated with this photo which I have again scanned from the 1940 catalog.

Concluding the catalog was a listing of track materials including rail, third rail, track gauges, etc. In short, they offered anything you would need to make an American OO gauge layout other than a caboose, which they would not offer until 1939.

Finally, I would note that in the 1937 series article the big news late in the year was the new Nason 2-8-0 model, which was not listed in either version of the 1937 catalog. The line was rapidly growing, it was quite a year for what was then the leading American OO gauge manufacturer.

Saturday, December 6, 2014

A Reefer with Vintage HO-OO Decals

One recent project was completing this 36' reefer. It came to me about 50% done.

The body is Picard with their scribed sides, but modified a bit to take die cast reefer doors of uncertain manufacture (maybe Selley). It also had a modified Graceline frame mounted and was assembled. I added all the roof and end details, including using modified Famoco/Eastern ladders and hatches. It is riding on Schorr trucks and has Kadee whisker couplers; I plan to run this when I run 1930s era equipment on the layout.

For every car there is always the question of painting and lettering. For lettering I opted to use this vintage set of Champion HO/OO decals, as made clear by the package. I think these are all actually HO decals but Champ felt there was enough OO market going in the post-war era to sell for a good while their decals packaged as HO/OO decals.

It could use a few more small details and touches. But as I have mentioned elsewhere in this site, it is always interesting to me to see vintage cars such as this come to life. In this case the model was not even completed by the original builder but now it certainly has a sharp look.